Filter
Top Products
iii
Read Me First!
Congratulations on the purchase of your new CD Color Printer. To
begin printing with your new printer immediately, please refer to the
following quick start instructions. For more complete information
regarding all aspects of your printers operation, please refer to the
printers main Users Manual.
HARDWARE SETUP
1. Unpackage your printer, and check that the following
items are included:
Power Adapter: Power Cord (220-240V units)
Printer Software CD
Color Ink Cartridge
Spare Ink Cartridge Holder
Cardboard CD Templates (5)
Warranty Statement and Registration Card
Operators Manual and Other Printed Information
2. Connect your printers power.
3. Install the included color ink cartridge by pressing the
Ink Cartridge Button and inserting the cartridge
copper-end first into the ink cartridge carrier. Then, push
the top of the cartridge back until it snaps into place. When
the cartridge is in place, press the Ink Cartridge Button
again to reset the cartridge carrier.
4. Press the CD Tray Button, and install one of the
cardboard CD templates into the CD Tray.
5. Run a self test according to the instructions in Section 2-D
of the printer Users Manual. This will ensure that both the
printer and the ink cartridge are functioning properly. This
procedure should also be done whenever you install a
new ink cartridge or if your printer has sat for a few days
without printing. If some of the nozzles do not seem to be
firing, perform a clean operation after the printer driver
has been installed. Refer to the cleaning procedure
explained within the cartridge button description of section
3-D or 4-D in the manual to clean the cartridge nozzles.
510171Pr5.qxd 5/2/2000 3:39 PM Page iii