Primera Technology 000424-510171-(05) Printer User Manual


 
vii
Please Note
The Spare Ink Cartridge Holder provides a convenient
place to store an extra ink cartridge and also prevents an
opened ink cartridge from drying out. To use this holder,
simply set it next to the printer. The Spare Ink Cartridge
Holder must always remain in an upright or vertical
position. Insert an Ink Cartridge into the holder, copper-end
first, until it snaps into place. To remove the Ink Cartridge,
push back on the holders securing tab and lift the Ink
Cartridge out.
Please Note
To fully utilize Signature IIIs high-speed printing, you must
set your PC parallel printer port to the ECP setting.
Otherwise, you may find that print speed is up to 50%
slower than you might expect.
Please refer to your computer systems documentation for
instructions on enabling ECP. It is almost always found in
the CMOS settings which are entered upon power-up.
Interactive Feature in this
PDF Document
There are interactive features that will allow you to jump to
different locations within the document. Each listing in the
Table of Contents is interactive. Place the cursor on either
the words or the page number. A small hand with a pointing
finger icon appears. Click on the line with the icon and the
document will jump to that page. If you want to return to the
Table of Contents, move the icon to the top of the page and
click on the arrow marked TOC. Navigating through the
Index is similar. Place the icon on one of the listings or
page numbers, click on it, and it will move to that page. The
text relating to the Index listing will appear in red. Returning
to the Index can be done by clicking on the arrow marked
Index.
510171Pr5.qxd 5/5/2000 4:50 PM Page vii