Filter
Top Products
48 Creating Discs
color and black cartridges for optimal print quality. In
addition, this utility will allow you to center and adjust
your printed image. Refer to the following for a description
of the settings in this area.
You will see both the Color and Monochrome Ink Levels are
displayed. The Color Ink Level represents the lowest color in
your cartridge. For instance, if your cartridge has 80% cyan
50% yellow and 65% magenta ink remaining, the level reported
would be 50%. You will also see the following buttons:
Clean Cartridge
Cartridges that sit idle in the Publisher for a period of time
may start to experience some drying of ink in the tiny nozzles
that make up the print head. Clicking the Clean Cartridge
button will cause the Publisher to pick a disc and place in into
the printer tray. The Publisher will then print a simple pattern
that will flush ink through the nozzles. The test pattern will
also show you if any nozzles are clogged. In the pattern you
will see some diagonal lines which should be continuous;
breaks in those lines indicate a clogged nozzle. Please note
that it may require more than one cleaning to fully clear all
nozzles. If the nozzles are not fully clear after a few cleaning
prints, it may be necessary to remove the cartridge and
actually clean the print head by gently blotting the nozzles
with a moist cloth or paper towel and replace it in the
Publisher.
511262.qxd 10/15/2009 10:37 AM Page 48
TOC
INDEX