Filter
Top Products
50 Creating Discs
The disc should look like this:
Once the print has finished, you will see the following
dialog box:
Look at the finished alignment disc and pick the numbers that
come closest to lining up with one another. For instance, on
the disc shown in this manual, the vertical alignment is 2 and
the horizontal alignment is 0. Enter this in the alignment dialog
box.
-5 -4 -3 -2 -1 0 1 2 3 4 5
5 4 3 2 1 0 -1 -2 -3 4 -5
Horizontal Calibration
Find and enter the number
whose lines tough
(must be the SAME number)
Vertical Calibration
Find and enter the number
whose lines tough
(must be the SAME number)
NOTE:
After printing this image
once, rotate this CD
so the ARROWS point
to the BACK of the printer
and print again.
-5
-4
-3
-2
-1
0
1
2
3
4
5
5
4
3
2
1
0
-1
-2
-3
-4
-5
BACK
BACK
511262.qxd 10/15/2009 10:38 AM Page 50
TOC
INDEX