Filter
Top Products
8 Hardware and Software Setup
Section 2: Hardware and Software
Setup
Setup
This section will describe the step-by-step process of setting up
your Publisher. This includes information on how to load the
supplies (ink and disc media) necessary to start producing
discs.
A. INSTALLING THE PC SOFTWARE
The Installer Disc has a menu that will guide you through
the process of setting up your duplicator. Please refer to the
following for more information on each step:
1. Place the Optical Disc Publisher Installer CD in your
CDRom Drive. The Installer application should automati-
cally launch in a few moments. If it does, proceed to Step 2.
If it does not automatically launch, follow these steps:
〈 Double-click the My Computer Icon, then double-click
the icon of the appropriate CD drive containing the
Software Installer disc.
〈 Double-click Installer.exe
2. In the Installer Application, click the Standard Install
button. The on screen instructions will guide you step-by-
step through the installation process.
B. INSTALLING THE MAC SOFTWARE
Please note that your user account must have administrative
rights to properly install a new printer. You can check with
your system administrator or check with Apple support to
confirm whether or not your account has administrative rights.
Install the software as follows:
a. Insert the Installation CD-ROM in your system's CD-ROM
drive.
b. Double-click the CD-ROM icon.
c. Double-click on the Disc Publisher SE Installer.mpkg file
icon. Follow the on-screen instructions.