Filter
Top Products
Hardware and Software Setup 9
d. The volume containing the operating system should be
selected for installation. Click the Continue button. All
components will be installed to their proper locations.
e. Once the installation has completed, click Quit.
You have successfully installed all the necessary software!
Section C below will describe how to connect the Publisher to
your Mac.
C. HARDWARE SETUP
Step 1: Applying Power
Important!
Remove all packing materials from the inside of
the Publisher before continuing with the following steps.
〈 Locate the power cord supplied with your Publisher.
〈 Plug the adapter into a surge protected outlet, and plug the
power plug into the power port on the rear panel of the
Publisher.
Step 2: Loading Media (Discs)
NOTE:
Your Publisher can print directly onto virtually any brand of inkjet
printable-surface CD/DVD media. However, different brands of discs
have different printable coatings. Because of this, you may need to
adjust the printer driver settings to accommodate your specific
brand of CD/DVD media. Refer to Section 3-D and 4-D for further
printer driver information.
Due to the wide variety of printable-surface CD/DVD media,
you may find that certain brands of discs provide higher print
quality than others. For maximum print quality, use CD/DVD
media authorized by Primera.