Filter
Top Products
Creating Discs on a Mac 39
Photo mode is best used for photographic images where
accurate color reproduction is very essential. Images
printed in this mode will look lighter than those printed in
Photo mode. Skin tones especially will look more natural
in this mode.
NOTE:
Exact color matching of the printed discs to the screen may never
be possible since there are factors that affect this out of the drivers
control. The surface of the disc reacts with the ink in the cartridge to
produce the color. For this reason, when printing the same image to
different brands of discs with different printable surfaces the printed
output can look entirely different .
• Intensity
The Intensity setting will control the amount of ink
saturation on the disc. When printing onto the Primera
ToughCoat discs, 96% is usually sufficient. When printing
on to other brands of media, or if you would like to print
darker colors, you may wish to increase the Intensity
setting.
• Inner Diameter
The inner diameter refers to the size of the non-printed
center on your disc. The size of the center hub can vary
from one type of media to the next. This allows you to set
the inner diameter in millimeters allowing you to print all
the way to the center hub regardless of the type of disc you
are using. For the discs that Primera sells, use the following
guide for Inner Diameter:
− 23 mm for Primera's Tuff-Coat CDR
− 24.9 mm for the Hockey Rink Disc, Business
Card Disc and 80mm CD
• Outer Margin
The Outer Margin refers to where the printing will cut
off around the outer edge of your disc. The size of the
printable surface can vary from one type of media to the
next. This allows you to set the outer margin in millimeters
allowing you to print all the way to the edge regardless of
the type of disc you are using.
• Save As Default
The Save As Default button will save the current settings as
the system-wide defaults.