Filter
Top Products
6 Hardware and Software Set-Up for Windows
Section 2: Hardware and Software
Set-Up for Windows
This section will describe the step-by-step process of setting
up your Printer. This includes information on how to
load the supplies (ink and disc media) necessary to start
printing discs.
A. QUICKSTART INSTALLER
The Installer Disc has a QuickStart menu that will guide you
through the process of setting up your printer. Please refer to
the following for more information on each step:
1. Place the AutoPrinter Installer CD in your CD-Rom Drive.
The Installer application should automatically launch in a
few moments. If it does, proceed to Step 2. If it does not
automatically launch, follow these steps:
• Double-click the My Computer Icon, then double-click
the icon of the appropriate CD drive containing the
Software Installer disc
• Double-Click INSTALL.exe
2. In the Installer Application, click the QuickStart Install
button. The QuickStart Install will guide you step-by-step
through the installation process. As you complete each
step, click Next.
Step 1: Applying Power
• Locate the power adapter supplied with your Printer.
• Place one end of the adapter cord into the power port
on the rear panel of the Printer.
510685.qxd 4/14/03 3:17 PM Page 6
TOC
INDEX