Filter
Top Products
Software and Hardware Set-Up for Macintosh 13
Section 3: Hardware and Software
Set-Up for Macintosh
The installer disc contains a set of programs to design and
control the printing of your discs. The following steps will
guide you through the installation of software and the setup of
the Bravo Disc AutoPrinter.
A. INSTALLING THE MAC SOFTWARE
Before installing Discribe please note that all software must be
installed on a hard disk. Once you have installed the software,
store the original program CD-ROM in a safe place.
Install the software as follows:
a. Insert the Bravo Installation CD-ROM in your system's
CD-ROM drive.
b. Double-click the CD-ROM icon.
c. Double-click on the Bravo AutoPrinter Installer.mpkg file
icon. Follow the on-screen instructions.
d. The volume containing the operating system should be
selected for installation. Click the Continue button. All
components will be installed to their proper locations.
e. Once the installation has completed, click Quit.
You have successfully installed all the necessary software!
The next section will describe how to connect the Bravo to
your Mac.
510685.qxd 4/14/03 3:18 PM Page 13
TOC
INDEX