Filter
Top Products
Select 10 CPI
51
Select 10 CPI
ASCII Code ESC P
Hex Code 1B 50
Dec Code 27 80
Purpose Selects 10-cpi character pitch.
Comment If you change the fixed-pitch setting with this command during
proportional mode (selected with the ESC p command), the
change takes effect when the printer exits proportional mode.
This command affects “Select CPI” on the front panel.
This command takes effect only in SBCS mode.
Select 12 CPI
ASCII Code ESC M
Hex Code 1B 4D
Dec Code 27 77
Purpose Selects 12-cpi character pitch.
Comment If you change the fixed-pitch setting with this command during
proportional mode (selected with the ESC p command), the
change takes effect when the printer exits proportional mode.
This command affects “Select CPI” on the front panel.
This command takes effect only in SBCS mode.
Select 15 CPI
ASCII Code ESC g
Hex Code 1B 67
Dec Code 27 103
Purpose Selects 15-cpi character pitch.
Comment If you change the fixed-pitch setting with this command during
proportional mode (selected with the ESC p command), the
change takes effect when the printer exits proportional mode.
Characters from 0x80 to 0xFE cannot be printed in this mode.
This command affects “Select CPI” on the front panel.
This command takes effect only in SBCS mode.