Filter
Top Products
46
Network Parameters
emaNretemaraPegnaRtluafeD
edoMdneS
,)tnioPottnioP(PCT
,)tnioPottnioP(PDU
tsacdaorBdna
)tnioPottnioP(PCT
sserddAnoitanitseD--
sserddAPI- sserddatluafeD
ksaMtenbuS-0.0.0.552
rebmuNtroPlacoL-0005
rebmuNtroPetomeR-0005
yawetaGtluafeD
sserddA
-0.0.0.0
Send Mode indicates the method which a RangeLAN2 Serial
Adapter will use to communicate with other RangeLAN2 units.
Point-to-Point mode allows a Serial Adapter to transmit packets
to only one other unit whose IP address is configured as the
transmitting unit’s Destination Address.
There are two transport layer protocols supported in Point-to-
Point mode: TCP and UDP. TCP offers reliable message deliv-
ery but may slow down performance. UDP offers less reliable
message delivery than TCP and may be selected to improve
speed at the cost of reliability.
When a RangeLAN2 Serial Adapter is set to Broadcast mode,
every Serial Adapter which receives the signal error-free and
which is set to the same Domain and Security ID will process the