Filter
Top Products
61
11. Display Parameter Values
The Serial Adapter displays all of the relevant parameters in one
centralized location. By choosing “Display Parameter Values,”
you can view the current and configured values for the Radio,
Network, Serial, and Advanced parameters.
Current values are already in use by the Serial Adapter. If the
configured value is different from the current value, the Serial
Adapter must be reset before the configured value takes effect.
At that time, the configured value becomes the new current value.
The following diagrams show the software trees associated with
the Display Parameter Values menu:
Dotted Line - Visible when confi
g
ured as a Master
Dashed Line - Visible when confi
g
ured as a Station
Domain Channel Subchannel Master/Station
Master Name Repeating Enabled MAC Optimize Inactivity Timeout (sec.)
Roaming Config. Roaming Enabled
Radio Parameters
Send Mode Destination Address IP Address (current) IP Address (configured)
Subnet Mask Local Port # Remote Port # Gatewayr IP Address (current)
Gateway IP Address (configured)
Network Parameters
Serial Parameters
Advanced Configuration Parameters
Display Parameter Values
Reset Parameters to Factory Defaults
Radio Configuration Menu
Network Configuration Menu
Serial Configuration Menu
Advanced Configuration Menu
View Statistics
Download New Software Version
Reset the Serial Adapter
Exit to Operating Mode
Serial Adapter Main Menu