Filter
Top Products
76
The four byte address field is the IP address of the destination
node. Broadcast addresses (for example, x.y.z.255) can also be
used.
Request Radio Signal Strengths
Purpose: To request the Serial Adapter to measure the strength of
RF energy on its current radio channel and report the signal
strength. The signal strength is reported as an 8-bit value from
00H (minimum signal value) to FFH (maximum signal value).
Response Expected from Serial Adapter = “Signal Strength
Report”
Message Format:
BYTE command (ASCII ‘R’, 52H)
BYTE seqno
Request Serial Adapter Version
Purpose: To request the physical address and version number of
the Serial Adapter. The address is reported as a 4 byte value, only
the lower 28 bits of which are meaningful. The version number is
reported as a 7 character string.
Response Expected from Serial Adapter = “Serial Adapter Ver-
sion Report”
Message Format:
BYTE command (ASCII ‘V’, 56H)
BYTE seqno