Filter
Top Products
3 -
4
To check for home position of the auto cutter, please open
the auto cutter and look into the blade slot and the spindle hole as
in pictures below. Use proper tool to cut away the paper around
auto cutter if it presents obstacle to the actions. Clear away any
paper scraps from the auto cutter once it is reset to position.
In case it is the auto cutter that fails to respond to the paper
cut command, please contact your dealer or a qualified service
person. However, please use manual cutter as a temporary
alternative measure before this problem is remedied.
Spindle Hole
Blade Slot
Retract blade from the slot
Move
spindle
down
Auto Cutter Adjustment Window
š
Î
š
Î