Filter
Top Products
2–Configuring NIC
NIC TroubleShooting/Diagnostics
2-44 SN0054671-00 A
NIC TroubleShooting/Diagnostics
NIC Linux Diagnostics
Linux Diagnostics
This section covers the following information for user diagnostics for Linux NIC
driver management applications:
Running Linux User Diagnostics
Linux Diagnostic Test Descriptions
Linux Diagnostic Test Messages
Running Linux User Diagnostics
Linux user diagnostics include QConvergeConsole diagnostics and ethtool
diagnostics.
QConvergeConsole Diagnostics
QConvergeConsole CLI-based diagnostics include the following commands:
To enable or disable the port beacon, issue the following command:
qaucli -pr nic -beacon [cna_port_inst] <on|off>
To run an internal loopback test, issue the following command:
qaucli -pr nic -intloopback <cna_port_inst> <tests_num>
<on_error>
where tests_num is the number of tests (1–65535) and on_error is either
0=Ignore or 1=Abort
NOTE:
The current release does not support external and internal loopback tests.
Support is expected in a future release.
NOTE:
Information on installing and starting the GUI version of QLogic's
QConvergeConsole utility is provided in the QConvergeConsole User's
Guide. All procedural information for that utility is covered in the
QConvergeConsole Help System.