Filter
Top Products
C – RPM Descriptions
OpenFabrics RPMs
C-4 IB0056101-00 G
S
The InfiniPath-MPI/RPMs are listed in Table C-4.
OpenFabrics RPMs
OpenFabrics and OpenSM are optional components. For ease of installation,
QLogic recommends that all of the OpenFabrics RPMs listed in Table C-5 and
Table C-6 be installed on all nodes. The development RPMs in Table C-7 are only
needed on the nodes where OFED programs are compiled. The opensm package
in Table C-8 should be installed only on the node that will be used as a subnet
manager. The packages in Table C-9 should be installed only if other HCAs are
used. The packages in Table C-11 should be installed if other MPI
implementations are desired.
Table C-4. InfiniPath-MPI/RPMs
RPM Name Front End Compute Development
mpi-benchmark-2.2-xxx_yyy.x86_64.rpm
MPI benchmark binaries
Optional Required Optional
mpi-frontend-2.2-xxx_yyy.i386.rpm
MPI job launch scripts and binaries,
including mpirun and MPD
Required Required Optional
mpi-libs-2.2-xxx_yyy.i386.rpm
Shared libraries for MPI
Optional Required Required
Table C-5. OpenFabrics Documentation/RPMs
RPM Name Comments
ofed-docs-2.2-xxx.1_3.yyy.x86_64.rpm
OpenFabrics documentation
Optional for
OpenFabrics
Table Notes
OpenFabrics documentation is installed in the same directory as the InfiniPath documentation.
Table C-6. OpenFabrics/RPMs
RPM Name Comments
dapl-2.2-xxx.1_2_5.yyy.x86_64.rpm
uDAPL 1.2 support
Optional for
OpenFabrics
dapl-2.2-xxx.2_0_7.yyy.x86_64.rpm
uDAPL 2.0 support
Optional for
OpenFabrics