Filter
Top Products
SN0051408-00 C 2
3
Configuration Steps
1. Gather the following information required to configure the iSR6142 routers (review the topology
diagrams in this document):
a. Local router management port:
IP Address ______.______.______.______
Subnet mask ______.______.______.______
Gateway ______.______.______.______
b. Remote router management port:
IP Address ______.______.______.______
Subnet Mask ______.______.______.______
Gateway ______.______.______.______
c. Local router gigabit Ethernet (GigE) ports to be used in FCIP connections:
GE1 IP Address ______.______.______.______
GE1 Subnet Mask ______.______.______.______
GE1 Gateway ______.______.______.______
GE2 IP Address ______.______.______.______
GE2 Subnet Mask ______.______.______.______
GE2 Gateway ______.______.______.______
d. Remote router GigE ports to be used in FCIP connections:
GE1 IP Address ______.______.______.______
GE1 Subnet Mask ______.______.
______.______
GE1 Gateway ______.______.______.______
GE2 IP address ______.______.______.______
GE2 Subnet Mask ______.______.______.______
GE2 Gateway ______.______.______.______
2. Install iSCSI/FC Router Manager (router management software) on your workstation.
3. Configure the iSR6142 routers:
a. Set up the management IP address, subnet mask, and gateway.
b. Set the time and date. The time and date are set up automatically when iSCSI/FC Router Manager
connects to the router.