Filter
Top Products
Quatech, Inc. AirborneDirect™ User Manual
64 2/21/2011 100-8510-110
Step
Description
Optional
Press Reload [Button]
Reloads the Network Settings page. Select
this is you have further configuration options to
change.
Optional
Press Restart [Button]
Restarts the device. After the device as
rebooted it will attempt to authenticate to the
configured network. As long as the network is
in range the wireless interface will connect.
Once authenticated the network should lease
an IP address to the WLAN interface and IP
connectivity is possible over the WLAN
network.
19.2 Configuring DHCP on Ethernet Interface
DHCP enabled on the Ethernet interface is the default configuration for the serial
devices. The Ethernet interface must be in client mode for this setting to be used.
The Airborne Device does not support the ability to enable DHCP on the WLAN
and Ethernet interfaces simultaneously (when in client mode). Only one may
have DHCP enabled at a time. The other interface must be configured to use a
static IP address.
Table 31 - Configuring DHCP - Ethernet
Step
Description
Navigation Bar
Select Configuration
You will see a group of fields under the banner
of WLAN Parameters.
Feature Link
Select Ethernet Settings
The wireless interface and security must be
configured before configuring the Ethernet
settings.
A page showing the range of Ethernet options
and fields, setting the mode of operation for
the Ethernet interface is done in this page.
Select Ethernet Role
Select Client from the drop down menu.
Press Commit [Button]
Saves changes to the device.
Press Reload [Button]
Reloads the Ethernet Settings page.
Feature Link
Select Network Settings
The wireless interface and security must be
configured before configuring the network
settings.
A page showing the range of network options
and fields, for both the WLAN and Ethernet
interfaces, is displayed.
Select Ethernet DHCP
Select Enabled from the drop down menu.
Optional
Select WLAN DHCP Name
Provides a method of uniquely identifying the
device in the DHCP lease table on the DHCP
server.
The default name is AirborneXXXXXX, where
XXXXXX matches the last 6 hexadecimal digits
of the Ethernet interface MAC address.