Quatech DP500 Server User Manual


 
AirborneDirect™ Users Guide Quatech, Inc.
100-8510-110 2/21/2011 85
Step
Description
Feature Link
Select Ethernet Settings
The wireless interface and security must be
configured before configuring the Ethernet
settings.
A page showing the range of Ethernet
options and fields, setting the mode of
operation for the Ethernet interface is done
in this page.
Select DHCP Server Enabled
Select Disable from drop down menu.
Select Ethernet Role
Select Router from the drop down menu.
Press Commit [Button]
Saves changes to the device.
Press Reload [Button]
Reloads the Ethernet Settings page.
Feature Link
Select Network Settings
The wireless interface and security must be
configured before configuring the network
settings.
A page showing the range of network
options and fields, for both the WLAN and
Ethernet interfaces, is displayed.
Select Ethernet Static IP Address
Enter the static IP address of the Ethernet
client attached to the devices Ethernet port.
The subnet of the address must be different
than the WLAN interface subnet.
The address must be in the format:
XXX.XXX.XXX.XXX
This is also the default address all incoming
traffic on the WLAN interface is routed to.
Select Ethernet Subnet Mask
Enter the subnet mask for the private
network that matches the subnet mask on
the Ethernet client.
The mask must be in the format:
XXX.XXX.XXX.XXX
Select Ethernet Gateway IP Address
Enter a valid Gateway IP address. This is the
Static IP address of the Ethernet interface on
the private network. This must be in the
same subnet as the Ethernet Static IP
Address, but a different address.
The address must be in the format:
XXX.XXX.XXX.XXX
This address should be entered into the
Gateway parameter for the Ethernet clients
on the private network.
Press Commit [Button]
Saves changes to the device.
Optional
Press Reload [Button]
Reloads the Network Settings page. Select
this is you have further configuration options
to change.