Filter
Top Products
10. Another dialog box will open to tell you that the installation is complete.
Click the “Finish” button to end the software part of the installation.
11. Windows 95 now instructs you to shut down your computer and install the
hardware. Click “Yes” to shut down your computer. Wait until Windows
95 informs you that it is safe to turn your computer off. When this
message appears, power down your computer.
12. You are required to manually configure the DS-200/300 to match the
resources allocated by Windows 95. Another option is to use the “Device
Manager” in Windows 95 to change the system resources allocated in
Windows 95 to match your preferences. See chapter 2 for information on
installing and configuring the DS-200/300.
3.2 Viewing and Changing Resources with Device Manager
The following instructions provide step-by-step instructions on viewing and
changing resources of the DS-200/300 in Windows 95 using the “Device
Manager” utility. Select Start|Help from within Windows 95 for additional
information on this utility.
1. Double click the “System” icon inside the Control Panel folder. This
opens up the System Properties box.
2. Click the “Device Manager” tab located along the top of the System
Properties box. This lists all hardware devices registered inside the
Windows 95 registry. Additional information is available on any of these
devices by clicking on the device name and then selecting the “Properties”
button.
3. Double click the device group “Multi-function Adapters”. The
DS-200/300 Enhanced Serial Adapter model name should appear in the
list of Multi-function adapters.
DS-200/300 User's Manual 3-3