Filter
Top Products
3.4 Installing SSP-100 under Windows NT
To allow easy configuration of the DSP-100 the Quatech Device Manager for Windows
NT has been written for the hardware. This configuration utility supports the DSP-100
only in block addressing mode.
To begin the installation, open Windows Explorer and search for the ‘Setup.exe’
command to install the Quatech Device Manager. <See following Windows Explorer
figure.> (D:\Serial Port Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA).
Once the installation is complete an icon will be placed on the desktop.
Windows NT Explorer
SSP-100
User’s Manual
3-12