Filter
Top Products
5.2 Monitoring The Status Of PCMCIA Cards
OS/2 Warp provides a utility called "Plug and Play for PCMCIA" that can be used to
monitor the status of each PCMCIA socket. In OS/2 version 2.1, this utility is called
"Configuration Manager". When a SSP-100 is inserted, the Card Type for the
appropriate socket will display "Serial". If the card is successfully configured, the Card
Status will display "Ready". If the card cannot be configured, the Card Status will be
"Not Ready" or "In". The resources claimed by a configured card can be viewed by
double-clicking on that card's line in the window.
Figure 11. OS/2 Plug and Play GUI with properly configured SSP-100.
SSP-100 User's Manual 4-8