Filter
Top Products
The X8 clock mode locks the ports hardware
clock at eight times the standard rate. The baud
rate the port runs at will always be eight times the
rate requested by the application. This mode is
useful for legacy applications which cannot
request baud rates over 115.200.
921,600X8
The X4 clock mode locks the ports hardware
clock at four times the standard rate. The baud
rate the port runs at will always be four times the
rate requested by the application. This mode is
useful for legacy applications which cannot
request baud rates over 115.200.
460,800X4
The X2 clock mode locks the ports hardware
clock at double the standard rate. The baud rate
the port runs at will always be double the rate
requested by the applications. This mode is
useful for legacy applicattions which cannot
request baud rates over 115,200
230,400X2
The X1 clock mode mimics a standard COM port.
The hardware drivers lock the clock to the
standard rate. The port will run at the baud rate
requested by the application.
115,200X1
Auto clock mode enables applications to request
any baud rate up to 921,600. The hardware
drivers will select the correct clock multiplier
based on the baud rate requested
921,600Auto
DescriptionMax bpsClock Mode
Data Rate Multiplier
5. Click the RS-422/485 tab to view the transmitter enable and connector pinout
options.
Windows 2000 4-10