Filter
Top Products
5 Windows NT
5.1 Installing SSP-200/300
To allow easy configuration of the SSP-200/300 the Quatech Device Manager for
Windows NT has been written for the hardware. This configuration utility supports the
SSP-200/300 only in block addressing mode.
To begin the installation, open Windows Explorer and search for the ‘Setup.exe’
command to install the Quatech Device Manager. <See following Windows Explorer
figure.> (D:\Serial Port Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA).
Once the installation is complete an icon will be placed on the desktop.
Windows NT Explorer
Windows NT 5-1