Filter
Top Products
Selecting the Active Port:
Each CPU port is assigned a numeric ID (CPU1 or CPU2). You access
the PC attached to a port by specifying the Port ID as part of the Hot
Key combination as follows:
1. Press and release Alt+Ctrl+Shift
2. Key in the appropriate Port ID (1 or 2)
3. Press [Enter]
Auto Scan Mode:
The Master View CS-12’s Auto Scan feature automatically switches
between the two PCs at regular intervals so that you can monitor
their activity without having to take the trouble of switching yourself.
To invoke Auto Scan Mode, key in the following Hot Key combination:
1. Press and release Alt+Ctrl+Shift
2. Press and release 0 (zero)
3. Press [Enter]
Once scanning begins, it continues until you press the [Spacebar] to
exit Auto Scan Mode. The port that was currently active at the time
scanning stopped remains active.
Note: While Auto Scan Mode is in effect, none of the other keyboard
keys will function. You must exit Auto Scan Mode by pressing
the [Spacebar] in order to use the console for anything else.
Last/Next Mode:
The Last/Next feature is provided to enable you to quickly switch back
and forth between computers in order to monitor them manually,
instead of using Auto Scan Mode. This method lets you dwell on a
particular port for as long or as little as you like - as opposed to Auto
Scan Mode, which switches after a fixed interval.
9