Filter
Top Products
Installation
Before you begin, make sure that power to all the devices (Master
View CS-12 and both PCs) you will be connecting up have been
turned off.
1. Plug the monitor, keyboard, and mouse into the Console port
connectors of the Master View CS-12 unit.
2. Use the extender cables (as described in the H a rd w a re
R e q u i re m e n t s and Unpacking sections), to connect the monitor,
keyboard and mouse ports of the PCs to the Master View CS-12
CPU Ports, as shown in the diagram below.
Note: If your PCs use AT style connectors for the keyboard and
mouse ports, refer back to the note in the Cables Section on
p.3.
4. Turn on the power to the connected PCs.
7