Filter
Top Products
Hardware Requirements
Console
• One VGA, SVGA, or Multisync monitor capable of the highest
resolution that you will be using on any PC in the installation
• One PS/2 mouse
• One PS/2 style keyboard or AT style keyboard plus keyboard
adapter
PC
The following equipment must be installed on each PC that is to be
connected to the system:
• A VGA, SVGA or Multisync card.
• A 6-pin mini-DIN (PS/2 style).
• Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on
pin 4 and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port
with +5V DC on pin 5 and ground on pin 4.*
* See the note under Cables in the next section.
Cables
Although it is possible to use standard extender cables to connect the
PCs to the Master View CS-12, for optimum signal integrity and to
s i m p l i fy the layout, we strongly recommend that you use the high
quality CS Custom Cables Part Number 2L-1001P/C.
Note: The keyboard and mouse cables have PS/2 style connectors
at each end:
• If your PC uses a standard AT style keyboard socket, you
will need an AT-to-PS/2 keyboard adapter, in order to plug
the cable into the PC’s keyboard port.
• CS-12 does not support Serial Mouse
3