Filter
Top Products
MBE Family Installation and Operation Manual Chapter 2 Installation
Installation and Setup 2-7
Link-2 TOP
DTE
DTE/DCE
Jumper
DCE
Link-1 BOTTOM
DTE/DCE
Jumper
V.35 Interface
DTE
DCE
V.24D, V.35D, V.24 V.35
Figure 2-3. Link Interface Card
LINK-2 corresponds to the upper interface connector.
LINK-1 corresponds to the lower interface connector.
STN HUB
6
Figure 2-4. LAN Interface Module (UTP)
Connecting the Interfaces
Figure 2-5 illustrates the MBE unit’s rear panel with a V.35 connector.
Figure 2-6 illustrates the MBE unit’s rear panel with a V.24 connector.
Note
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com