Filter
Top Products
28
Basic Operation
29
Basic Operation
To pause on an active object:
1. Press /II/SEL while iSCAN is stopped on the object.
2. To resume scanning, press /II/SEL again.
Skipping Objects
You can “skip” objects you no longer want to monitor while scanning
or browsing objects. You can also restore skipped objects.
To skip objects while scanning:
1. Press SKIP when iSCAN stops on an unwanted object.
2. iSCAN marks the object as skipped and you will not receive
further transmissions on the object until it is restored.
To resume scanning without skipping the object:
1. Press or when iSCAN stops on an object.
2. iSCAN will interrupt the current transmission and begin scanning
again, but will continue to receive further transmissions on the
object.
To skip objects while browsing:
1. Browse to the object you want to skip and press SKIP.
2. The lower-case “
s
” in the Channel Display Indicator turns to
upper-case “
S
” to indicate the object is skipped.
To restore all skipped objects:
1. Press MENU to display the Main Menu.
2. Scroll to
Restore Skipped and press .
To restore skipped objects one at a time:
1. Browse to the skipped object you want to restore and press
SKIP.
2. The upper-case “
S
” in the Channel Display Indicator turns to
lower-case “
s
” to indicate the object is no longer skipped.
Editing Objects
You can edit the objects in your playlists using iSCAN or the PC
Application. See “Installing the iSCAN PC Application” on page 46 and the
application’s help files for more information.
To edit objects using iSCAN:
Press MENU when iSCAN stops on an object while scanning.
-or-
1. Press MENU until the Main Menu is displayed.
2. Scroll to
Browse Objects and press .
3. Press or to scroll through the playlists.
4. Press and to scroll to the object you want to edit.
5. Press MENU to activate the Object Edit Menu.
6. Press and to scroll to the option you wish to change.
7. Press to toggle values or proceed to the next step.
The following options are available in the Object Edit Menu:
–Object Edit– Menu
Main Menu Navigates to iSCAN’s Main Menu
Cancel
changes
Exits the Object Menu without saving changes
Save
changes
Saves your changes and exits the Object Menu
Alpha Tag Change the name of the selected object. Follow the on-
screen instructions and press , , , to change the
object name.
Set
Playlists
Change the playlists that the selected object is a member
of. Press /II/SEL to change playlist membership by adding
or removing checkmarks next to the playlists. Press to
save and return to the Object Menu.