Filter
Top Products
29
To lock out an ID, press
L/O
when the
ID appears.
The ID is locked out, and the next ac-
tive ID appears.
Unlocking a Single ID
1. Hold down
L/O
until you hear two
short beeps.
2. Repeatedly press t or s to select
the ID you want to unlock.
3. Press
L/O
.
The ID is unlocked and the next
locked ID appears.
4. Press
SEARCH
to continue the
scanner’s previous function.
Unlocking All IDs
Hold down
L/O
until you hear two short
beeps. Then press
E
to unlock all the
IDs at once.- The scanner beeps
twice.
Note:
When you unlock all the IDs,
the scan list mode appears. Press
SCAN
to scan the IDs stored in your
scan lists or press
SEARCH
to contin-
ue the scanner’s previous function.
For more information about scan lists,
see “Scan Lists” on Page 31.
Using Trunk Tracking Scan
Delay
Many trunked systems have a period
of 2 or more seconds between a query
and a reply. You can program a 5-
second delay so the scanner holds on
an ID for 5 seconds to wait for a reply.
The scanner continues to monitor the
frequency for 5 seconds after the
transmission stops before resuming
scanning.
Press
DELAY
to turn trunk tracking
scan delay on or off.
DELAY
appears
when trunk tracking scan delay is set.
Note:
If you consistently miss re-
sponses even with trunk tracking scan
delay set, you might need to change
the default system type or the fleet
map you are using. See “Scanning
Type I and Hybrid Trunked Systems”
on Page 33.
20-430.fm Page 29 Wednesday, August 4, 1999 1:29 PM