Filter
Top Products
32
Storing IDs into Scan Lists
While Searching
Follow these steps to select a scan list
location and store an ID during a
search.
1. When your scanner stops on an
ID you want to store, press
PRI-
ORITY
. The currently selected
scan list memory location flashes.
2. Press
E
to store the ID in the
selected scan list memory loca-
tion. Or, repeatedly press s or t to
select the scan list memory loca-
tion you want, then press
E
.
3. Press
SEARCH
to resume search-
ing.
Automatically Storing an ID in
a Scan List Location
To display a scan list location and
store an ID in that location during a
search, press
PRIORITY
to display the
current scan list location, then press
E
when your scanner stops on an ID you
want to store.
To store an ID in the first available
scan list location during a search,
press
E
at any time.
Deleting a Stored ID
1. Press
MANUAL
.
2. Repeatedly press s or t to select
the scan list location (shown at the
top of the display) you want to
delete.
3. Press
0
then
E
.
SCANNING THE SCAN
LISTS
Press
SCAN
to begin scanning the
lists you have programmed.
SCAN
scrolls on the display.
Note:
If you haven’t programmed any
IDs,
SCAN
scrolls on the display but
your scanner does not stop on an ac-
tive conversation.
Scan List Location
20-430.fm Page 32 Wednesday, August 4, 1999 1:29 PM