Filter
Top Products
36
Block Size
Code
Block Size
Code
Selecting a Preset Fleet Map
1. Press
SCAN
, then hold down
TRUNK
until the scanner beeps
twice.
BANK
,
TRUNK
and the
bank numbers flash.
2. Select the bank where you want to
store the preset fleet map by
pressing a number key.
3. Press
DATA
.
4. Repeatedly press s or t to select
E1
(Type I and hybrid), then press
DATA
again.
Note:
To select Type II, press
E
when
E2
appears.
5. Repeatedly press s or t to select
the name of the map you want
(such as
E1P7
), then press
E
.
The scanner then searches for trans-
missions using the preset map you
chose.
Note:
When the scanner searches for
transmissions, you see Type I fleet
and subfleet IDs such as
100-12
,
100-9
,
000-12
, or
400-8
.
How do you know if the preset map
you selected is correct? Listen to see
if you are following complete conver-
sations. If not, try another preset map.
Programming a Fleet Map
1. Hold down
TRUNK
until the scan-
ner beeps twice.
BANK
,
TRUNK
and the bank number flash.
2. Select the bank where you want to
program the fleet map by pressing
a number key.
3. Press
DATA
.
4. Repeatedly press s or t until
E1
appears, then press
DATA
.
0S30S4
1S31S3
2S112S10
3S43S4
4S44S4
5S05S4
6S06S12
7S07
—
E1P15 E1P16
Block Size
Code
Block Size
Code
0S40S3
1S41S10
2S42S10
3S113S11
4S114S0
5S05S0
6S126S12
7
—
7
—
20-430.fm Page 36 Wednesday, August 4, 1999 1:29 PM