Radio Shack PRO-2053 Scanner User Manual


 
27
Special Features
frequency. The scanner locks out the fre-
quency, then continues searching.
Notes:
The scanner does not store locked-out
frequencies during a search.
You can lock out as many as 50 fre-
quencies in each bank. If you try to lock
out more,
)<DFIPý=LCCü
)<DFIPý=LCCü)<DFIPý=LCCü
)<DFIPý=LCCü
appears.
If you lock out all frequencies in one
search bank and only this search bank
is activated,
ãCCý I8E><Jý (F:B<;ý FLKü
ãCCý I8E><Jý (F:B<;ý FLKüãCCý I8E><Jý (F:B<;ý FLKü
ãCCý I8E><Jý (F:B<;ý FLKü
appears and the scanner does not
search.
Reviewing Locked-Out Frequen-
cies
To review the frequencies within a search
bank that you locked out:
1. Press
SEARCH
to set search mode.
2. Press
FUNC
then
L/OUT
. The locked-out
frequency and
(F:BFLKý C@JK
(F:BFLKý C@JK(F:BFLKý C@JK
(F:BFLKý C@JK
appear.
Press
8
88
8
or
9
99
9
to review the list. The
locked-out number and the total locked-
out number also appear as
(ó+ý 44ý F=
(ó+ý 44ý F=(ó+ý 44ý F=
(ó+ý 44ý F=
55
5555
55
. (The tenth of thirty locked out num-
bers would appear as
(ó+ýñòýF=ýïò
(ó+ýñòýF=ýïò(ó+ýñòýF=ýïò
(ó+ýñòýF=ýïò
.) If
the search bank has no locked-out fre-
quencies,
!DGKPôý (F:BFLKý C@JK
!DGKPôý (F:BFLKý C@JK!DGKPôý (F:BFLKý C@JK
!DGKPôý (F:BFLKý C@JK
appears. Press
FUNC
then
L/OUT
again
to cancel reviewing locked-out frequen-
cies.
Clearing a Locked-Out Frequency
To clear a locked-out frequency, select that
frequency (see “Reviewing Locked-Out Fre-
quencies”), then press
CLEAR
.
If all locked out frequencies are cleared with-
in a bank,
!DGKPôý(F:BFLKýC@JK
!DGKPôý(F:BFLKýC@JK!DGKPôý(F:BFLKýC@JK
!DGKPôý(F:BFLKýC@JK
appears.
Clearing All Locked-Out Frequen-
cies in a Search Bank
1. Press
SEARCH
.
2. Select the search bank in which you
want to clear all locked-out frequencies.
3. Press
FUNC
then press
L/OUT
. Lockout
list appears.
4. Press
FUNC
then
6
.
áFE=@IDý C@JK
áFE=@IDý C@JKáFE=@IDý C@JK
áFE=@IDý C@JK
:C<8Iåý
:C<8Iåý:C<8Iåý
:C<8Iåýñ
ññ
ñæ5!/ôý,I<JJýFK?<IýB<Pý=FIý*+ô
æ5!/ôý,I<JJýFK?<IýB<Pý=FIý*+ôæ5!/ôý,I<JJýFK?<IýB<Pý=FIý*+ô
æ5!/ôý,I<JJýFK?<IýB<Pý=FIý*+ô
appears. Press
1
to clear all locked-out
frequencies.
(@JKý :C<8I<;
(@JKý :C<8I<;(@JKý :C<8I<;
(@JKý :C<8I<;
appears for
about 2 seconds. Press any key other
than
1
to cancel clear.
Note:
You cannot clear all locked-out fre-
quencies if all frequencies in the selected
bank are locked out.
PRIORITY
In addition to the 300 programmable memory
channels, the scanner has one priority chan-
nel.
With the priority feature, you can scan
through programmed channels and still not
miss an important or interesting transmission
on a specific channel. When priority is turned
on, the scanner checks that channel every 2
seconds, and stays on the channel if there is
activity until the activity stops.
Notes:
The priority feature does not operate
while the scanner receives a trunking