Filter
Top Products
37
Trunking Operation
Locking Out Talk Group IDs
Note:
You can only lock out talk group IDs
when the scanner is in the closed mode (see
“Open and Closed Modes” on Page 38).
1. Press
PROG
.
2. Press
TRUNK
.
3. Press
FUNC
,
8
88
8
or
9
99
9
to move to the
desired bank.
4. Press
8
88
8
or
9
99
9
to select the ID memory.
5. Press
L/OUT
to lock out the ID.
B
BB
B
appears.
6. To remove the lockout from a trunking
ID, manually select the ID memory, and
press
L/OUT
until
(
((
(ý
ýý
ý
disappears.
While the scanner shows a text tag you can
confirm the ID code when the received signal
is the voice channel.
1. Press
TEXT
while the scanner is receiv-
ing the voice channel and displaying the
text tag. The ID code appears as
)+0è444444
)+0è444444)+0è444444
)+0è444444
or
! è4444
! è4444! è4444
! è4444
.
2. Press
TEXT
again to cancel.
Delay Function in ID Indication
Mode
You can set the ID delay function separately
from channel delay.
1. Press
FUNC
then
./DELAY
while you are
programming the trunked ID.
1J<ý 1Gó
1J<ý 1Gó1J<ý 1Gó
1J<ý 1Gó
FNEýB<PJýKFýJ<Ký% ý;<C8P
FNEýB<PJýKFýJ<Ký% ý;<C8P FNEýB<PJýKFýJ<Ký% ý;<C8P
FNEýB<PJýKFýJ<Ký% ý;<C8P
.
ý
ýý
ý
ðôòýJ<:FE;J
ðôòýJ<:FE;JðôòýJ<:FE;J
ðôòýJ<:FE;J
appears.
2. Press
8
88
8
or
9
99
9
to select
*FE<
*FE<*FE<
*FE<
,
òôí
òôíòôí
òôí
,
ñôò
ñôòñôò
ñôò
,
ñôí
ñôíñôí
ñôí
,
ðôò
ðôòðôò
ðôò
,
ðôí
ðôíðôí
ðôí
,
ïôò
ïôòïôò
ïôò
,
ïôí
ïôíïôí
ïôí
or
îôò
îôòîôò
îôò
J<:FE;J
J<:FE;JJ<:FE;J
J<:FE;J
.
3. Press
ENTER
.
If the ID delay is active, it watches the control
channel command for the delay time when-
ever the signal disappears from the voice
channel.
Reviewing Locked-Out Talk Group
IDs
Note:
You cannot clear all lockouts from a
talk group at the same time.
1. Press
PROG
then
TRUNK
.
2. Press
FUNC
then
L/OUT
. The locked out
ID appears. If the ID memory bank has
no locked out ID, you hear the low beep
tone.
3. Press
FUNC
then
8
88
8
or
9
99
9
to select a
search bank. Or, just press
8
88
8
or
9
99
9
to
search for any locked out IDs in a bank.
Clearing Talk Group IDs
1. Press
PROG
then
TRUNK
.
2. Press
FUNC
,
8
88
8
or
9
99
9
to select ID
memory.
3. Press
FUNC
then
CLEAR
.
Clearing All Talk Group IDs in One
Bank
You can clear all talk group IDs within a
bank. This lets you quickly delete all talk
group IDs from a bank if you want to use the
bank to store different data (such as a new
set of talk group IDs).
1. Press
PROG
.
2. Press
TRUNK
to enter a talk group ID
memory mode.
3. Select a talk group ID bank using
FUNC
,
8
88
8
or
9
99
9
.