Filter
Top Products
14
CONNECTING THE ANTENNA
Follow these steps to attach the supplied flexible antenna to the connec-
tor on the top of your scanner.
1. Align the slots around the antenna’s connector with the tabs on the
jack.
2. Press the antenna down over the jack and rotate the antenna’s
base clockwise until it locks into place.
Connecting an Optional Antenna
The antenna connector on your scanner makes it easy to use the scan-
ner with a variety of antennas. Instead of the supplied antenna, you can
attach a different one, such as an external mobile antenna or outdoor
base antenna. Your local Radio Shack store sells a variety of antennas.
Always use 50-ohm coaxial cable, such as RG-58 or RG-8, to connect
an outdoor antenna. For lengths over 50 feet, use RG-8 low-loss dielec-
tric coaxial cable. If your antenna’s cable does not have a BNC connec-
tor, you will also need a BNC adapter (available at your local Radio
Shack store).
Warning:
Use extreme caution when installing or removing an outdoor
antenna. If the antenna starts to fall, let it go! It could contact overhead
power lines. If the antenna touches a power line, contact with the anten-
na, mast, cable or guy wires can cause electrocution and death! Call the
power company to remove the antenna. Do not attempt to do so your-
self.
20-508.fm Page 14 Wednesday, August 4, 1999 1:50 PM