29 Beyond the Basic
s
To release the hold and continue searching, press
HOLD. Or, if you did not press HOLD, simply press
FUNC + or FUNC + to continue searching.
Note: Because there are many different frequencies
allocated to fire and police departments, it can take
several minutes to search all the service
frequencies.
Storing Frequencies into Channels
During Service Search
You can store frequencies you found during service
search or service search hold mode into channels.
X Press FUNC + PGM during service search or
service search hold mode. The frequency and the
lowest blank channel alternately appear.
Y Press E to store the frequency into the blank
channel. If you want to select another channel,
press FUNC + or before you press E.
To enter the frequency, press FUNC.
disappears. Then press E. You can also use
the 0-9 keys to select the bank. To continue
searching, press FUNC + SVC.
If you entered a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated.
If you entered the frequency by mistake, press
.
/CLR
then enter the correct frequency. To enter the
frequency anyway, press E to accept.
F