Filter
Top Products
Beyond the Basic
s
4
4
Press FUNC + to decrease the frequency by one
step or FUNC + to increase it by one step. Hold
down or for about 1 second to quickly
decrease or increase the frequency.
To resume direct search, press FUNC + SEARCH or
HOLD. ( or appears on the display, showing the
search direction).
Storing Frequencies Found During
Direct Entry Search into Channel
Memory
Follow these steps to store frequencies received
during direct entry search mode or direct entry
search hold mode.
X Press FUNC + PGM in direct entry search mode
or direct entry search hold mode. The frequency
and lowest blank channel alternate on the display.
Y Press E to store the frequency into the blank
channel. To select another channel, press FUNC
+ or . Then press FUNC. disappears.
Then press E. You can also use the 0-9 keys to
select the bank.
If you enter a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated.
If you entered the frequency by mistake, press
F