Filter
Top Products
43 Beyond the Basic
s
Y Enter the frequency you want to start from by
using the number keys. (Press
.
/CLR to enter a
decimal point).
Z Press FUNC + or . The scanner searches,
starting from the frequency you entered in
Step
Y.
If you enter a frequency that is out of range, the
scanner sounds an error tone and Error appears.
Press FUNC + to change the search direction
downward or FUNC + to change the search
direction upward. Frequencies appear during the
search.
Notes:
• You can set the delay function on or off during
the search or while the search stops.
• You can skip a frequency when the search stops.
After the search skip frequency is set, the
scanner starts direct search again.
Direct Entry Search Hold Mode
To stop searching during direct entry search, press
HOLD. HOLD appears. In this mode, pressing FUNC
+ changes the search direction downward and
pressing FUNC + changes the search direction
upward. or appears depending on the search
direction.