Filter
Top Products
55 Beyond the Basic
s
frequently asked questions
Q: My scanner isn’t working at all. How do I turn it on?
A: The scanner might not be receiving power.
Make sure the batteries are installed correctly and
are good (if you installed alkaline batteries) or fully
charged (if you installed rechargeable batteries). See
“powering your scanner” on Page 5 for more
information.
If the batteries are good, make sure the AC adapter’s
or DC adapter’s barrel plug is fully inserted into the
scanner’s 6V 300 mA jack. See “Using AC Power”
on Page 10 for more information.
If the scanner is receiving power, make sure it is
turned on. See “Turning On The Scanner and Set-
ting Squelch” on Page 25 for more information.
Q: My scanner is on but won’t scan. How do I get it
to scan?
A: Make sure the squelch is adjusted correctly. See
“Turning On The Scanner and Setting Squelch” on
Page 25 for more information.
If the squelch is set correctly, you might not have
stored frequencies into any channels or only one
channel. You must store at least two frequencies for
the scanner to scan. See “Storing Known Frequen-
cies Into Channels” on Page 25 for more
information.