Filter
Top Products
Special Features
36
7UKPI"2TKQTKV[
The priority feature lets you scan
through channels and still not miss
important or interesting calls on a
frequency you select. You can
program one frequency into the
priority channel. As the scanner
scans, if the priority feature is
turned on, the scanner checks the
priority channel for activity every 2
seconds.
±
1. Press
PGM
, then press
PRI/
ALERT
.
F9>
F9>F9>
F9>
and
&&&$&&&&
&&&$&&&&&&&$&&&&
&&&$&&&&
or
the previously-stored
frequency appear.
2. Enter the frequency you want
to enter into the priority
channel, then press
ENT
. The
display flashes twice.
To turn on the priority feature,
press
PRI/ALERT
during scanning
or searching.
FH?
FH?FH?
FH?
appears. The
scanner checks the priority
channel every 2 seconds and
stays on the channel if there is
activity.
F9>
F9>F9>
F9>
and the frequency
appear whenever the scanner is
set to the priority channel.
To turn off the priority feature,
press
PRI/ALERT
.
FH?
FH?FH?
FH?
disappears.
7UKPI"VJG"&KURNC["
$CEMNKIJV
You can turn on the display's
backlight for easy viewing in the
dark. Press / to turn on
the light for 5 seconds. To turn off
the light sooner, press /
again.
Press both
PGM
and / to
turn on the display's backlight for
±
"016'"
±
"
If you program a
weather frequency
into the priority
channel and the
scanner detects a WX
alert tone on that
frequency (see “WX
Alert” on Page 32),
the scanner sounds
the alert tone and
7B;hj
7B;hj7B;hj
7B;hj
flashes. Press
any key to turn off the
alarm.
20-315.fm Page 36 Wednesday, July 24, 2002 2:27 PM