Filter
Top Products
Special Features
40
then connect the other end of
the cable to on top of the
scanner.
3. Using the software supplied
with the programming kit,
configure the software to work
with your scanner by clicking
on
Tools
, selecting
Configuration
, then selecting
PRO-89
.
4. While pressing
ENT
and
9
,
turn on the scanner.
F=C
F=CF=C
F=C
and
M_h;Zý
M_h;ZýM_h ;Zý
M_h;Zý
appear. Then send the
data from the PC.
Ij7hj
Ij7hjIj7hj
Ij7hj
and
the data being received by the
scanner appears in the order
it is received.
±
5. When the scanner
successfully receives all data,
;dZ
;dZ;dZ
;dZ
and
<_d_I^ý
<_d_I^ý<_d_I^ý
<_d_I^ý
appear. If the
scanner received an error
while receiving data,
;dZ
;dZ;dZ
;dZ
and
Z#;hh
Z#;hhZ#;hh
Z#;hh
appear. If the scanner
received a checksum error
while receiving data,
9#;hh
9#;hh9#;hh
9#;hh
and
a number shown next to
9#;hh
9#;hh9#;hh
9#;hh
indicates the packet number
where the error occurred.
±
±
"016'"
±
"
If the scanner did not
receive a start or end
bit respect-ively from
the PC,
Ij7hj
Ij7hjIj7hj
Ij7hj
and
;dZ
;dZ;dZ
;dZ
do not appear.
20-315.fm Page 40 Wednesday, July 24, 2002 2:27 PM