Filter
Top Products
16 April, 2003 Fibre Channel Switch 7
Welcome
You can use your 8-, 16-, or 8 to 64-port QLogic SANbox2 Fibre Channel switch to
create fabrics for Grass Valley Media Area Networks (SCSI protocol) and Video
Networks (Internet Protocol). This manual supplements the information provided by
the QLogic SANbox2 Switch manuals that you received with your switch.
Please refer to the following QLogic manuals, included on the SANsurfer Tool Kit
CD-ROM, when installing and configuring your QLogic SANbox2 Switch.
• SANbox2 Fibre Channel Switch Installer’s/User’s Manual - This is your primary
reference on the installation and initial setup of your specific model of QLogic
switch. It also provides maintenance and repair information.
• SANbox2 Switch Management User’s Manual - This manual describes the switch
management software application that allows you to monitor and administer your
QLogic SANbox2 Switch.
NOTE: If you are installing the QLogic SANbox2 Switch in a Media Area Network,
please refer to your Media Area Network Instruction Manual for detailed
installation and configuration information.