Filter
Top Products
8 Fibre Channel Switch 16 April, 2003
How to use the manuals
The following table describes how to use the documentation set that accompanies
your QLogic SANbox2 Switch and other Grass Valley products.
NOTE: Carefully read and understand all procedures before attempting any
operation with your switch. Procedures such as replacing modules in the 8 to
64-port switch can produce unexpected results if you do not follow the published
procedures exactly.
Support for your Fibre Channel switch
Your QLogic SANbox2 Switch is sold, supported, and serviced by Grass Valley.
If you have any questions about your QLogic SANbox2 Switch, or if you need any
help or service for the switch, please contact your local Grass Valley Support
representative listed at the front of this manual
NOTE: Do not contact QLogic directly for support of your QLogic SANbox2
Switch.
For information on... See...
Installing the switch in a
Profile Video Network
“Installing a Switch in a Profile Video Network” beginning on
page 9 of this manual.
SANbox2 Fibre Channel Switch Installer’s/User’s Manual
SANbox2 Switch Management User’s Manual
Installing the switch in a
Media Area Network
Media Area Network Instruction Manual
SANbox2 Fibre Channel Switch Installer’s/User’s Manual
SANbox2 Switch Management User’s Manual
Configuring the Fibre Channel
switch for NetCentral monitoring
“Monitoring your switch with NetCentral” beginning on page 20
of this manual.
SANbox2 Fibre Channel Switch Installer’s/User’s Manual
SANbox2 Switch Management User’s Manual