Filter
Top Products
Chapter 5
Packet Classification and Labelling
E-NIT-CTC-20041213-0013 v0.5
32
Example So, in the example shown in the previous figure, the rules will be applied to incoming
packets in the following order:
1 routing labels
1 routing user labels
2 routing default labels
2 qos labels
1 qos user labels
2 qos default labels
!
No rules should be created in the chain _default_labels, because this chain is
reserved for automatically created rules that substitute source-routes where
needed. When creating classification rules, only create them in the chain
_user_labels or in newly created sub-chains in the chain _user_labels.