Filter
Top Products
Chapter 5
Packet Classification and Labelling
E-NIT-CTC-20041213-0013 v0.5
45
Log
State
Label
Modifying a rule
Rules that have been created can be modified with the modify command. The
parameters for the modify command are exactly the same as those for the add
command.
The list command The list command can be used to view a list of the rules created. This command can
be refined with the following parameters:
chain
format.
With the chain suffix a chain name can be specified, so only the rules that apply to
that chain will be shown.
With the format suffix we can select the output format. The default format is pretty,
the other option is cli
Example. Execute the following CLI command to view the rules that are related to
the chain qos_default_labels:
Log values Description
enable Enables logging when this rule applies. This can be
used for debugging.
disable Disables logging
State values Description
enable Enables this rule.
disable Disables this rule.
Label value Description
none If no label needs to be assigned.
link Link is used incase the clink parameter is used.
label name The name of the label you want to assign to a packet
when the rule applies.
{Administrator}=>:label rule list chain=qos_default_labels format=cli