Filter
Top Products
21
(a) Branch Trace Function
The branch source and destination addresses and their source lines are displayed.
Branch trace can be acquired by selecting the [Branch trace] check box in the [AUD function]
group box of the [Trace mode] page.
The branch type can be selected in the [AUD Branch trace] page.
Figure 2.2 [AUD Branch trace] Page
(b) Window Trace Function
Memory access in the specified range can be acquired by trace.
Two memory ranges can be specified for channels A and B. The read, write, or read/write
cycle can be selected as the bus cycle for trace acquisition.
[Setting Method]
(i) Select the [Channel A] and [Channel B] check boxes in the [AUD function] group
box of the [Trace mode] page. Each channel will become valid.
(ii) Open the [Window trace] page and specify the bus cycle and memory range that are to be
set for each channel.