Filter
Top Products
19
Table 2.5 lists the combinations of conditions that can be set under Break Condition 1, 2, 3.
Table 2.5 Dialog Boxes for Setting Break Conditions
Type
Dialog Box
Address
Bus
Condition
(Address)
Data
Bus
Condition
(Data)
ASID
Condition
(ASID)
Bus
State
Condition
(Bus
Status)
Count
Condition
(Count)
Internal
I/O
Break
LDTLB
Instruction
Break
[Break Condition 1]
dialog box
O
O
O
O O
X X
[Break Condition 2]
dialog box
O
X
O
O
X X X
[Break Condition 3]
dialog box
X X X X
X
O
O
Notes: 1. O: Can be set in the dialog box.
X: Cannot be set in the dialog box.
2. For Break Condition 2, X-bus and Y-bus conditions cannot be specified.
2.2.3 Trace Functions
The SH7710 E10A emulator supports the trace functions listed in table 2.6.
Table 2.6 Trace Functions
Function Internal Trace AUD Trace
Branch trace Supported (eight branches) Supported
Range memory access trace Not supported Supported
Software
trace
Not supported Supported
Table 2.7 shows the type numbers that the AUD function can be used.
Table 2.7 Type Number and AUD Function
Type Number AUD Function
HS7710KCM01H, HS7710KCI01H Not supported
HS7710KCM02H, HS7710KCI02H Supported