Filter
Top Products
( 16 / 52 )
Chapter 2. Preparation
2.1 Package Components
The M30100T3-RPD-E package consists of the following items. When unpacking, check to see if
your M30100T3-RPD-E contains all of these items.
Table 2.1 Package components
Please keep the M30100T3-RPD-E's packing box and cushion material in your place for reuse at a
later time when sending your product for repair or other purposes. Always use these packing box and
cushion material when transporting the M30100T3-RPD-E.
If any of these items are missing or found faulty, please contact your local distributor. Also, if there
is any question or doubt about the packaged product, contact your local distributor.
2.2 Other Tool Products Required for Development
To bring forward programs development on the M16C/10 Series MCUs, the products listed below
are necessary in addition to those contained package above. Get them separately.
Table 2.2 Other tool products
* "x" denotes a number.
* To purchase these products, contact your local distributor.
Item
M30100T3-RPD-E emulation pod main unit
FLX120-RPD flexible cable for connecting PC4701
OSC-3 16MHz oscillator circuit board for main-clock (preinstalled)
OSC-2 oscillator circuit board (bare-board)
Hardware tool user registration FAX sheet (English)
Hardware tool user registration FAX sheet (Japanese)
M30100T3-RPD-E supplementary document (English)
M30100T3-RPD-E supplementary document (Japanese)
M30100T3-RPD-E user's manual (this manual)
M30100T3-RPD-E user's manual (Japanese)
Quantity
1
1
1
1
1
1
1
1
1
1
Emulator main unit
Emulator debugger
Pod probe
Pitch converter board
PC4701 (excluding PC4700L and PC4701L)
M3T-PD30 V.8.20 Release 1 or later
M301xxT-PRB
Required according to the MCU package