Filter
Top Products
( 3 / 52 )
Preface
The M30100T3-RPD-E is an emulation pod for the M16C/10 Series of Renesas 16-bit MCUs. It's
used with a PC4701 emulator (excluding PC4701L and PC4700L) and a pod probe.
This user's manual mainly describes specifications of emulation pod M30100T3-RPD-E and how to
setup it. For details on the following products, which are used with the M30100T3-RPD-E, refer to
each product's user's manual.
• Pod probe: Each User's Manual
• Emulator: PC4701 User's Manual
• Emulator debugger: User's manual of each emulator debugger for PC4701
All the components of this product are shown in "2.2 Package Components" (page 16) of this user's
manual. If there is any question or doubt about this product, contact your local distributor.
To use the product properly
Precautions for Safety
• In both this User's Manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
• The icons' graphic images and meanings are given in "Chapter 1. Precautions for
Safety". Be sure to read this chapter before using the product.
When using outside Japan
• When using in Europe, the United States, or Canada, be sure to use both the emulator
and the emulation pod which meet local standards. EMI standards are not met when
the M30100T3-RPD-E is used with the PC4700H emulator.