Renesas M30620T-CPE Network Card User Manual


 
( 23 / 52 )
2.6 Turning On the Power
(1) Checking the Connection of the Emulator System
Before turning the power ON, check the connection of the host machine and the emulator main unit.
(2) Turning On the Power
Power ON the target system and the emulator main unit as simultaneously as possible.
CAUTION
Notes on Power Supply:
As this emulator cannot supply power to the target system, provide the target system
with a separate power supply from that of the emulator.
This emulator consumes max. 500 mA of electrical current from target system.
Therefore, set the power supply of the target system considering this consumption.
Keep target system power supply voltage within the range of 3.0 to 5.0 V.
Do not change target system power supply voltage after power has been activated.